Pages

Friday, February 7, 2014

Inspiration Nation//Transfer images on fabric!

So I've been on this crazy wild chase to get the newest designs from my collection printed on fabric. All was grand and lush till I realized I've never done fabric printing before (painting, sure but printing? Whoa, hold up right there!). So here's your basic tut for printing out those cutesy images you own or have designed like me onto fabric. All you need is a glob of modpodge, wax paper (optional),foam brushes, your fabric and the printed paper the design of which you want to print on your fabric.

Easy enough? Let's get started!


MATERIALS:

Modpodge (matte and gloss)
Printed image (I used Inkjet)
Fabric (any will do. I used white cotton)
Paintbrushes/foam brushes for the modpodge
Sponge
A bowl of water
Wax Paper, optional

INSTRUCTIONS:

1. Begin by laying out the wax paper to protect your work surface from the gooey sticky mess of the modpodge. For the first round, I'm using the matte version of modpodge. Have the image side of the paper facing you and dunk it in a whole lotta modpodge. Do nice, even strokes and you need to put a "thick" layer. When you're done, the colors of the original image should hardly peek through.
2.When you're done, gently lift the paper off the wax paper and put the image side down facing the fabric. The blank side should face you know. Leave this to dry a day.

3. 24 hours later, you should find the whole fabric-image combo stiff because the glue has dried. You'll now wet the sponge with some of the water and gently press down onto the blank side of the image which faces you. Keep dabbing on the water gently until you see the pattern and colors coming through again.
4.Slowly scrub the paper which will come off like shreds and leave a vibrant print behind. Scrape of the entire image (gentle is key, scrape too much and you'll rip off the print from the fabric too!). If you need to, dab the image with water again to make sure it is wet during the whole process.

5.This step is so important and I want you to pay extra effort and attention here. You'll want to make sure that you completely remove off all the tiny bits of paper sticking in there. Rub it all off because if you don't and it dries, it won't be a pretty sight. I overlooked this a bit while printing on mine and I was left with tiny white flecks in some part of my fabric print :(

6.Do a light layer of modpodge (gloss version) to seal it all in, bring out the vibrancy and add a pretty shine. This last step goes that extra length to perk your image up!

And that's it! You can use modpodge meant for fabric and waterproof modpodge if you wish to wash your fabric in the future.
Yes, the color did turn out that vivacious!
(PS: If you can't judge if you removed all the paper, wait until the fabric dries and if it shows off the tiny white specks, wet it again and gently rub them off. Don't apply the modpodge until you do this step because removing them after the modpodge dries clear is pretty much impossible. A lesson learnt!)
This is how it looks from the back. ^
I'll be using this fabric for a very special purpose which I'll share on the blog soon ;) You can check out Craft A Doodle Doo's new hip online shop where you purchase the entire collection of these super chic prints!

Have any queries? Drop a comment below!
In the meantime, share a lil blog love and pin/share if you liked this trick!

You can also subscribe to Craft A Doodle Doo (in the sidebar) for more clever DIYs. You can find me mostly on Pinterest and occasionally on good ol' Facebook!

.......
I bid you goodbye for now with tons of more inspiration at my DIY gallery.
Love, Nash!


2 comments:

  1. Thanks for this tutorial, i never see someone transfer image on fabric like that before!
    I always hear people using the iron!

    ReplyDelete
  2. Iron-on papers can be a tad expensive and I've found that this method results in just as vibrant colors! You're welcome!

    ReplyDelete